What is the cost of an electronic design custom?

The minimum hardware design cost is on average 1,000 Euros. Simple software costs an average of 1,800 Euros. The highly complex electronic board design costs 25,000 euros. A complex electronic board may include high-accuracy analogue measurements, a data logger, wireless communications, and complex input/output functions.

What is the cost of an electronic design custom.?

The costs of designing electronic boards include various activities, not only of a strictly technical nature. The main costs are essentially linked to HARDWARE and SOFTWARE development costs. The cost of the electronic board is a completely different story. You can find some examples in this LINK

SOME EXAMPLES OF COSTS

If the design of the electronic board involves studies, complex research, and complete approvals of third-party certifications, the cost will reach tens of thousands of euros. Below are examples of boards created with development costs.


ELECTRONIC BOARD HARDWARE DEVELOPMENT COSTS

We give an overview of the tasks covered by the hardware design costs before going on to the visual examples.

ELECTRONIC BOARD HARDWARE DEVELOPMENT COSTS

- General analysis of the product from a physical point of view.

- Drafting of a project draft

- Market research of similar products

- Study and research of special components

- Purchase and verification of special components

- Product cost analysis

- Creation of the electrical diagram

- Production of prototypes

- Printed circuit design

- Programming of robots for SMD assembly

- Manual assembly costs

- Laboratory performance costs

- Costs of experimental tests

- Tooling costs for the production of printed circuits

- Consumables

- Field support for trials and testing.


SOFTWARE DEVELOPMENT COST

Before moving on to the visual examples, we summarise the activities included in the software design costs.

SOFTWARE DEVELOPMENT COST

- General analysis of the product from a functional point of view

- Drafting of a block diagram of the main functions

- Market research of similar products to optimize functions

- Study and research of an adequate processor given possible expansions

- Creation of computer simulation software

- Entering the software into the microcontroller

- Laboratory tests and simulations

- Error shooting

- Software testing and modifications until customer approval.


DO YOU WANT TO UPDATE THE COST OF YOUR ELECTRONIC BOARD?

The COVID-19 pandemic has completely upended the world market for electronic components. It appears that things have returned to somewhat normal. Nevertheless, some customers still purchase components at exorbitant costs even though overall prices have decreased by 50%. We can offer guidance on cost audits that are updated, if that is your intention open the page

SOME EXAMPLES OF ELECTRONIC BOARD COSTS


LOOKING FOR MANUFACTURING SERVICES?

Contact us today if you are looking for a European electronic manufacturing services provider. We can make an offer to help your business run.

ELECTRONIC MANUFACTURING SERVICES


BLUETOOTH-BASED 3D MAGNETOMETER

This device finds application in robots. The electronic board interfaces with an embedded 3d magnetometer based on MEM technology.

HAND-MADE PROTOTYPE PICTURE

BLUETOOTH-BASED 3D MAGNETOMETER

After making accurate calculations, the MCU sends the data about the magnetic field via Bluetooth to an AI-based computer.

Microcontroller: 32 BIT MCU

Dimensions: 80mm X 40mm

HARDWARE design costs: €2350 / SOFTWARE: €8400

Project execution time: 90 days


INSTRUMENTATION ELECTRONIC BOARD EXAMPLE

Description: small card for analogue signal acquisition and signal conversion. Data are stored in a flash memory. The oversampling technique is used to get a 14-bit resolution (native 10-bit AD). It features 16 analogue channels that interface with a K-type thermocouple.

HAND-MADE PROTOTYPE PICTURETotal Components Count: 88

Microcontroller: PIC18F66K4O

Dimensions: 90mm X 40mm

HARDWARE design costs: €2350 / SOFTWARE: €2400

ANALOGUE MULTIPLEXER DESIGN


SOLAR PANEL ELECTRONIC CONTROLLER EXAMPLE

 This electronic board manages the automatic switching of solar panels and the automatic management of a system with 12 solar panels. The system shares an inverter producing electricity from biogas. The board features high-impedance sample-and-hold circuits capable of interfacing 600Vdc solar panels. A supercapacitor holds the data in case of power failure.

HAND-MADE PROTOTYPE PICTURE

600VDC ANALOGUE INTERFACE BOARD FOR SOLAR PANELS

Total Components Count: 69

Processor type  PIC18326MCU 8 BIT

Dimensions:280mm x 320mm

HARDWARE: €2350 / SOFTWARE: €3800

Project execution time: 40 days


ENCRYPTED COMMUNICATION ELECTRONIC BOARD

The purpose of this device is to encrypt phone calls. The signal processor 'chops' the audio streams in coded packets.  Bluetooth module. Following a proprietary algorithm, the receiver puts the audio packet in the correct order.

HAND-MADE PROTOTYPE PICTURE

BLUETOOTH BASED AUDIO DEFRAGMENTER.jpgThe transmission is still voice-based communication, But without decoding nobody can understand the content of the audio. In other words, this module translates the input language into an unknown language. Only the receiver can convert the audio into the original data stream. The receiver introduces only a 5% distortion. This will make the audio fully understandable.

Total Components Count: 72

Microcontroller: reserved information

Dimensions: minimum 20mm x 12mm, maximum 50mm x 50mm

HARDWARE design costs: €1500  SOFTWARE COST: 22.000 € (APPs excluded)

Project execution time: 180 days


OLED, LCD AND TFT DISPLAY INTERFACE DESIGN COSTS

Managing the displays is relatively simple from a hardware point of view. The costs are around a few hundred euros. However, graphics management of displays is very expensive, especially for applications that require control of individual pixels. For instrumentation applications, for example, the design of an interface for a measuring instrument with a real-time oscilloscope function (as in the image shown) can reach 8,000 euros.

TFT AND OLED DEVELOPMENT COST.jpg

Hardware costs increase considerably for applications with an extended temperature range (-30/+70). The design presents considerable difficulties. An alternative is to use video cards and programs with high-level language. This is not our specialization. We develop applications managed by microcontrollers.


CUSTOMIZED OFFER ELECTRONIC BOARD DESIGN

Bernini Mentore

COST OF CONSULTANCY

€249

VAT INCLUDED WITH THE ISSUE OF TAX INVOICE

DESCRIPTION OF THE SERVICE

INFO 0039 335 70 77 148

Payment, including VAT, can also be made by credit card on the PAYPAL platform to the Bernini Design SRL company account. For payment by bank, a proforma invoice is issued.

The drafting of the design offer is issued following the meticulous verification of your needs. Communication takes place by telephone on 335 70 77 148 or electronically. Bernini Design signs a confidentiality agreement.  A binding design offer is sent within 72 hours. The offer includes an estimate of the costs of the electronic card based on the lots you request.


BERNINI DESIGN ROMANIA SRL

  Calea Chişinăului  32A

 700177 Iaşi

(ROMANIA)

  VAT RO31228395

Support:

+40 723 573 171

bernini@bernini-design.ro


BERNINI DESIGN ITALIA SRL

  Zona Industriale

 46035 OSTIGLIA

(ITALY)

  VAT IT01453040204

Support:

+39 335 70 77 148

bernini@bernini-design.ro